0.01
TI008G0001
General Index
General Information
- Symbols in the manual Page 1.01
- Purpose of Document Page 1.02
- Required Qualications for Operators Page 1.03
- Identication data of the Manufacturer and the Machine and the location of
the nameplate “CE MARKING” Page 1.04
- General Delivery Notes - Final inspection - General Safety Warnings Page 1.05
- Settings at the Customer’s expense Page 1.09
- Instructions on how to request interventions - Instructions on how to order
spare parts - The manufacturer’s address Page 1.10
General Information - SAFETY
- Dangers and residual risks and General Information Page 2.01
- Responsibilities Page 2.04
- Description of Pictograms Page 2.05
Description of Machine
- General Description of Machine Page 3.01
- Technical Data and Overall Dimensions Page 3.11
Transportation and handling Page 4.01
Installation
- Position of compressor Page 4.02
- Electrical connection Page 4.03
- Connection to the air network Page 4.04
- Dimensions of compressed air distribution piping Page 4.05
- Heat recovery Page 4.06
Safety Devices Page 5.01
Commands and control Page 5.02
Use of compressor
- Foreword Page 6.01
- Operation modes Page 6.02
- MAESTRO
XS
Page 6.04
- Operational Failures Page 6.05
- Start - Stop Page 6.06
Maintenance Page 7.01
- Réguler Checksums Page 7.02
- Check of oil level - Cleaning and/or replacing the air suction lter -
Cleaning the oil/air radiator Page 7.03
- Cleaning the pre-lters- Cleaning and/or replacing the oil return valves Page 7.04
- Replacing the oil lter Page 7.05
- Replacing the oil/air separator elements Page 7.06
- Oil change Page 7.08
Lubricants Page 8.01
Troubleshooting Page 9.01
The electrical motor Page 10.01
Storage - Decommissioning and dismantling Page 11.01
Condensate discharge in optional kit Page 12.01
Attachments:
Form to request Technical Service
Form to request spare parts
Parts to be replaced during maintenance
“Technical Data” Sheets
To Next Page
Loading...
Need help?
General
