Mattei AC 6000 Series - Identification data of the Manufacturer and the Machine and the location of the nameplate CE MARKING

TI008G0001
1.04
General Information
A specic plate on the machine gives the following in-
delible information on the CE MARKING:
Model
Code
Serial number
Year of manufacture
Delivery
Pressure
Power
Number of runs
Dryer
Tank Capacity
Total Weight
Name and address of manufacturer
The “CE MARKING” plate has been applied at the
base of the machine.
The relevant “DECLARATION OF CONFORMITY” has
been attached.
It is forbidden to remove the “CE MARKING” plate and/
or exchange it for other plates of machines of the same
model supplied to the Customer or the operator.
Should the “CE MARKING” plate be accidentally dam-
aged or removed from machine, the customer is required
to inform the Company.
251
602
Identication data of the Manufacturer and the Machine and the location of the nameplate “CE
MARKING”
Ing. ENEA MATTEI S.p.A. is identied as the machine’s manufacturer in conformity with the laws in
force with the following acts:
- Declaration of conformity - CE Marking – Instruction Manual