BLADE
1-4
TI215G0010
IDENTIFICATION DATA OF THE MANUFACTURER AND THE MACHINE AND THE LOCATION
OF THE NAMEPLATE “CE MARKING”
Ing. ENEA MATTEI S.p.A. is identied as the machine’s manufacturer in conformity with the laws in force with the
following acts:
Declaration of conformity
CE Marking
Instruction Manual
A specic plate on the machine gives the following indelible information on the
CE MARKING:
Model
Code
Serial number
Year of manufacture
Delivery
Pressure
Power
Number of runs
Dryer
Tank capacity
Total weight
Name and address of manufacturer
The “CE MARKING” plate has been applied at the base of the machine.
The relevant “DECLARATION OF CONFORMITY” has been attached.
It is forbidden to remove the “CE MARKING” plate and/or exchange it for other plates of machines of the same model
supplied to the Customer or the operator. Should the “CE MARKING” plate be accidentally damaged or removed from
machine, the customer is required to inform the Company.
General information
To Next Page
Loading...
Need help?
General
