EXPERIENCED MECHANIC. FAILURE TO COMPLY MAY RESULT IN DAMAGE
TO EQUIPMENT AND / OR INJURY OR DEATH TO PERSONNEL.
A. Engine
For engine troubleshooting see charts indicating faults and recommended repair procedures,
refer to Manufacturer’s Operation and Maintenance Manual.
If the particular problem is not covered or you are unsure of what steps to take, contact your
dealer for assistance.
B. Transmission
1. Paver fails to move under power.
•
Inadequate oil level in hydraulic reservoir
•
Control cable broken or loose
•
Inadequate oil flow through transmission suction filter
•
Driveline mechanical failure
2. Paver moves in neutral
•
Stroke control adjustment
•
Control cable damage
C. Electrical System
To Next Page
Loading...