January 31, 2022
How to Pull Out Tape
1. Squeeze the handle so that the tape catch will catch the tape end deep enough.
2. Release the handle as explained. The tape will pull out.
3. If the tape catch unit does not catch the tape end when you squeeze the handle, please
squeeze the handle harder several more times, and the tape catch will return to its
normal position (this is not a trouble with the tapener).
Note: this should be done only when the tape catch does not catch the tape end.
How to Bind Objects
1. Press the tape against the object until it is positioned inside the tapener.
2. Then fully squeeze the grip with the tape positioned centrally, and the object will be
bound by both the tape and staple, simultaneously the tape is cut off.
To Next Page
Loading...
