January 31, 2022
How to Change Blade
Preparation
1. Do not remove the cap from the blade.
2. Remove the tape and staples.
3. Open the arm and tape holder cover,
4. Hold the main body with one hand.
Change the Blade
1. Press the button and pull out the old cutting blade.
2. Press the button and push the cutting blade cap deep enough so that three triangles are
aligned (correct position shown in the figure).
Release the button and pull off the cutting blade cap.
WARNING
Keep your fingers away from the cutting blade.
Confirm that the round hole of the cutting blade is completely hidden.
To Next Page
Loading...
