45
500/600 type:
I. Fix the installation board.
Install the installation board horizontally on structural parts in the wall with the spaces provided around
the plate.
In case of brick, concrete or similar type walls, make 5mmdia, holes in the wall. Insert clip anchors for
appropriate mounting screws.
Fix the installation board on the wall.
Right installation:
False installation:
II. Drilling a hole.
Determine the pipe hole position using the installation board, and drill the pipe hole (N95mm) so it
slants slightly downward.
Always use a wall hole conduit when piercing metal lath, ply wood or metal plate.
12.3.3 Connective Pipe and Drainage Installation
I. Drainage
Run the drain hose sloping downward. Do not install the drain hose as illustrated below.
MAXA DC Fan Coil Unit
To Next Page
Loading...
