Be careful while using the memory card especially while
inserting and uninstalling the card. Some memory cards
must be formatted on a computer before the first use.
Regularly make backup copies of data stored on cards
used in other devices, if you use SD Cards. Misuse or
other factors might damage the card or make the card
lose its content.
Charging Battery
Important! Only the battery included in the set should be
used. Using other batteries might damage the phone
and shall void warranty.
Never connect the charger while the back cover is
removed.
To charge the phone:
1. Plug the charger into a power outlet.
2. Plug the charger cable into a slot at the top edge
of the phone. A message about the charger being
connected appears on the display screen, and
the battery icon will keep blinking while the
phone is being charged.
3. When the battery is fully charged, unplug the
charger from the power outlet, and then unplug
the cable from the phone.
As soon as the charging process is completed, the
battery icon will stop blinking.
To Next Page
Loading...
