- Powering on/off beep
- Warning alerts (for instance low battery alert)
In Idle mode, press and hold the key # to enable the
profile Meeting, press and hold again to return to the
previous profile.
Phone Settings
16.2.1 Set the Time and Date
To set the date and time, select in MENU: Settings-
>Phone Settings->Time & Date. Select „Time zone” to
select a location you want, and then „Set time/date” to
enter the time and date. To navigate between date and
time use keys Up/Down/Right/Left; to enter time and
date, press keys 0-9.
You can also format time (12h or 24h), date
(DD/MM/YYYY, MM/DD/YYYY or YYYY/MM/DD) and
date separator. If the battery was removed, after
replacing the battery you have to set the date and time
again (if it is not automatically taken from the network).
Option Update after zone change allows you to
enable/disable the function of auto update after the time
zone change.
Option Auto Time Update allows you to select whether
after switching off, the phone should get time
automatically updated, only after confirming, or not at
all.
To Next Page
Loading...
