16.7.2 Phone Security
You can enable the phone lock. While switching on the
phone, you will be required to enter the lock code. The
default lock code is 0000.
Restore Factory Setting
This option allows you to restore factory settings. Select
in MENU:
Settings->Restore Factory Settings, and enter the
security code. Press the green receiver key to confirm.
17. Computer Connection
You can connect the phone to a computer using a USB
cable; you can copy and transfer files between the
phone and the computer.
Getting connected:
- plug the USB into the phone
- plug the other end of the USB cable to the USB port in
the computer
- there will be a message on the phone screen: „Mass
Memory Device” and „Port COM”. Select: Mass Memory
Device.
18. FAQ (Troubleshooting)
Warning: Default security code: 0000
To Next Page
Loading...
