Maxcom KXT480 User Manual

ENGLISH
19
1
In standby mode, press SET/STO button.
The display shows ' SET 1 DATE '.
2
Press UP or DOWN button until the display shows 'SET 3 FLASH'.
3
Press SET/STO to confirm.
4
Press UP or DOWN button to select 100 (default),300, 600, or 1000.
5
Press SET/STO button to confirm the setting. The display shows ' SET 1
DATE ' , you can continue with programming
,or press DELETE button to return standby mode.
6 TELEPHONE OPERATIONS
6.1 To answer a call
When the phone rings;
Lift the handset or press the SPEAKERPHONE button on the Base unit.
The Call timer starts after going on line.
6.2 Making a call
1
2
Lift the Handset, listen for a dial tone
The display shows ' 00-00 '.
Dial the telephone number you wish to call.
The display shows the number as you 14 digits dia l(maximum of
will be shown).
To end the call, return the Handset to the Base unit.
6.3 To end a cal
Replace the Handset on the Base unit cradle or press the SPEAKERPHONE button
on the Base unit.
The SPEAKERPHONE light indicator will turn OFF.

Maxcom KXT480 Specifications

General

Type	Analog telephone
Answering machine	No
Big buttons	Yes
Mounting type	Desk
Product color	White
Dialing	Tone
Phonebook capacity	- entries
Call list capacity phonebook	20
Volume control	Digital
Battery type	AAA
Number of batteries supported	2