Maxcom KXT480 User Manual

ENGLISH
20
6.4 During a call
To adjust the
handset volume
Adjust the volume of the handset to your comfortable
volume level using the Handset volume switch located on
the top cover of the Base unit
MUTE Function
During a call press MUTE button.
When the mouthpiece is muted, the person at the
other end of the call cannot hear you but you can
hear his side
To switch
between the
Handset and the
Speakerphone
During a phone conversation through the Handset, press
the SPEAKERPHONE button to speak hands-free.
The conversation remains through the Handset
until the Handset is replaced on the Base unit cradle
Then the Speakerphone light will turn on . While in
speakerphone mode, lift the Handset to switch off the
Speakerphone and talk through the Handset.
To adjust the
speakerphone
volume
Adjust the volume of the speakerphone to your
comfortable volume level using the SPEAKERPHONE
volume switch located at the right side of the Base unit.
7 CALLER DISPLAY OPERATION
VERY IMPORTANT:
To use Caller Display you must first subscribe to your network provider's Caller Display service.
If you subscribe to a Caller Display service, you can see the phone number of the person calling
you before you answer. The caller display information includes:
 The caller's number (up to 14 digits)
 The date and time of the call
Condition of Incoming Caller Information
LCD Screen will display
It is a duplicate one
REP
It is a new one
NEW
A call from someone whose number is unavailable
(for example an international call).
UNAVAILABLE
A call from someone whose number is withheld
WITHHELD
The caller Display is incomplete or corrupted
ERROR
Your have a new Voice Mail Message
(This is a caller display service, but is not usually
available from network providers.)
7.1 Caller Display list
Telephone automatically stores the caller display information from the last 20 (14 digits) incoming calls. If
new calls are stored, the New calls LED flashes and the display icon NEW is on with the number of new calls
indicated.
The total number of calls is shown on the main standby screen by '00 CALL', '01 CALL' or ' XX CALLS'. If a call is
received when the Call list is full, then the new entry will replace the oldest one.
Viewing the
Caller Display
list
1
2
In standby mode, press UP or DOWN button.
The display shows the most recent record.
If there are no Caller Display records, the display will show
End.
Press UP or DOWN again to scroll to the next
Caller Display

Maxcom KXT480 Specifications

General

Type	Analog telephone
Answering machine	No
Big buttons	Yes
Mounting type	Desk
Product color	White
Dialing	Tone
Phonebook capacity	- entries
Call list capacity phonebook	20
Volume control	Digital
Battery type	AAA
Number of batteries supported	2