Maxcom MM818

24
8.7.1 EMERGENCY CONTACTS
You can select up to five emergency contacts. To quickly select
an emergency contact, enter main Menu ->Settings ->Emerg.
Settings ->Emerg. Contacts. Select an item to update, press OK
to enter an emergency contact, and press OK again to confirm.
Next, press the Left Function Key “Save”.
8.7.2 USER INFORMATION
Select Menu ->Settings ->Emerg. Settings ->User Info to enter
the User information such as their name, health problems,
allergies, and blood type.
8.7.3 EMERGENCY MESSAGE CONTENT
You can update a text message to be texted to emergency
contacts in emergency procedure. A default text message
reads: „Emergency! Call me”. To update the message, select
Menu ->Settings ->Emerg. Settings ->Emerg. Message. Enter a
text of your choice, and press „OK” (Left Function Key), to save
the emergency message. You can enable/disable sending the
emergency message in emergency procedure. To do so, select
in Menu ->Settings ->Emerg. Settings ->Emerg. Message -
>Status.
8.7.4 DISABLE EMERGENCY SIGNAL
You can enable/disable an emergency beep in emergency
procedure. To do so, select in Menu ->Settings -> Emerg.
Settings ->Emerg. Beep.
8.7.5 EMERGENCY MESSAGE
If the voice message is enabled, and the emergence phone call
is received, a phone recipient will hear the message: „It is an
emergency call, press 5 to receive”. If 5 is not pressed within 10
seconds, the phone will dial another emergency number from