Maxcom MM920 User Manual

35
- Go to Date: enter the date you want to go to
- Go to current date: it allows you to go to the current date,
- Week view, goes to a different calendar view.
Calculator
To enable the calculator, in MENU select: Tools-
>Calculator. There are four possible mathematical
operations on the phone: addition, subtraction,
multiplication, and division.
Enter the first number using keys 0-9, and then use
UP/DOWN/RIGHT/LEFT, select the operation, and enter
the next number. Press OK.
Alarm Clock
You can set five independent alarms in the phone. In order
to activate the alarm clock in MENU, select: Tools->Alarm
Clock. Select a given alarm and select Edit. You can
activate/deactivate the alarm clock, set the time for your
alarm clock to go off, alert tone, and repeat. If the phone is
switched off, the alarm clock will still go off as long as the
battery is sufficiently charged. If the alarm goes off, press
the LFK to deactivate the alarm clock. Press the Right
Function to snooze; the alarm will go off again in 5
minutes.
Torch
To enable/disable a torch press a key located on the side
of the phone. In Idle mode, press and hold the torch key
until the torch icon appears on the display screen. To
enable a torch, press the torch key. With the keypad
locked, the torch is impossible to be switched on, it will

Maxcom MM920 Specifications

General

Display diagonal	2.8 \
Display resolution	240 x 320 pixels
Calculator	Yes
Standby time	460 h
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Rear camera resolution (numeric)	2 MP
SIM card capability	-
2G bands (primary SIM)	900, 1800 MHz
Mobile network generation	2G
Form factor	Bar
Personal info management (PIM)	Alarm clock, Calculator, Calendar
Cables included	USB
Subscription type	No subscription
Product color	Yellow
Battery capacity	- mAh
Standby time (2G)	- h

Weight and Dimensions

Depth	14 mm
Width	64 mm
Height	139 mm
Weight	140 g