Maxcom MM920 User Manual

45
You can also format time (12h or 24h), date
(DD/MM/YYYY, MM/DD/YYYY or YYYY/MM/DD) and date
separator. If the battery was removed, after replacing the
battery you have to set the date and time again (if it is not
automatically taken from the network).
Option Update after zone change allows you to
enable/disable the function of auto update after the time
zone change.
Option Auto Time Update allows you to select whether
after switching off, the phone should get time automatically
updated, only after confirming, or not at all.
15.2.2 Language
This option allows you to change the language of the
phone menu. If you accidently change the language, to
return to the language you want, in Idle mode, press:
- 1x OK
- 1x DOWN
- 1x OK
- 1x DOWN
- 1x OK
- 1x DOWN
- 1x OK
Select the language you want and press OK.
15.2.3 Scheduled Power On/Off
You can schedule time for the phone to be switched on or
off.

Maxcom MM920 Specifications

General

Display diagonal	2.8 \
Display resolution	240 x 320 pixels
Calculator	Yes
Standby time	460 h
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Rear camera resolution (numeric)	2 MP
SIM card capability	-
2G bands (primary SIM)	900, 1800 MHz
Mobile network generation	2G
Form factor	Bar
Personal info management (PIM)	Alarm clock, Calculator, Calendar
Cables included	USB
Subscription type	No subscription
Product color	Yellow
Battery capacity	- mAh
Standby time (2G)	- h

Weight and Dimensions

Depth	14 mm
Width	64 mm
Height	139 mm
Weight	140 g