14
2. Remove the protective film on the surface of the screens before use.
3. The power input required by this product is 5V-20V +/-2V,and it required sustained operating
power is ≥10W.(If the power supply provided by the laptops is not within this range, please
use an external power supply.)
5. Do not squeeze or apply exceeding force to the surface of the screens.
6. Avoid using sharp objects on the screen surface.
4. Avoid excessive humidity and dust build -up to avoid any sort of failure, causing circuit corrosion.
7. This product is suitable for general commercial and household use in an optimal temperature
environment between -20℃and 60℃.
8. Disconnect any power cables when the device is not in use.
9. The maximum folding angle of the F1 is 360 degrees. When at the maximum angle, the screen
should not be further bent or squeezed to avoid damage.
To Next Page
Loading...
