MAXFREE F1 - Installation and Setup; Method of Unfolding the Screen; Installing the Screen onto Bracket

Installation and Storage
2
1. Method of Unfolding
Adjust the base size to fit the laptop
2. Installing the screen
Step 1: Align the card slot of the screen with the buckle in the shaft, and press it in the direction shown in the figure
Step 2: Press the screen in the direction shown in the figure until the screen snaps into place
Note: The maximum stretching length of the base is 400mm
3
Erect the support bar
Press to pop up the screen
Remove the screens in order
Supports 360° rotation in
horizontal/vertical direction
1
Horizontal screen installation
Vertical screen installation
2
Step 2Step 1
Step 2
Step 1