MAXFREE T2 - User Manual

Pay attention to the switching sequence of the screen
2. Ensure that all connected cables are secure and not loose before usage.
T2 USER'S GUIDE
3. The required sustained power for this product is 10W. Please confirm that the laptops
USB-C or USB-A port can sustain 10W (5V/2A).
Windows Mac
1. Please install the included display driver provided. Briefly turning off your anti-virus
software to allow the installation may be required.

MAXFREE T2 Specifications

General

Resolution	1920x1080 (Full HD)
Response Time	5ms
Panel Type	IPS
Connectivity	HDMI, VGA
Aspect Ratio	16:9
Brightness	250 cd/m²
Contrast Ratio	1000:1
Viewing Angle	178°(H)/178°(V)
Color Gamut	72% NTSC

Summary

Installation and Storage Guide

Unfolding Sequence

Connecting the T2

Guide on connecting the T2 to laptops, detailing Type-C interface requirements.

Alternative Connection Methods

Driver Installation for Laptops

Instructions for installing the necessary display drivers on laptop systems.

Cable Connection Methods for Additional Power

Display Settings Configuration

Windows 10 Display Settings

Guide on configuring display settings and arrangement in Windows 10.

macOS Display Settings

Steps for configuring display settings and arrangement on macOS.

macOS Monterey Display Settings

Specific configuration steps for macOS Monterey display settings.

Troubleshooting and Frequently Asked Questions

Troubleshooting No Signal

Steps to resolve issues when the display shows no signal.

Driver Software Download and Installation

Antivirus Software Impact on Installation

Changing Screen Extension Order