MAXFREE T2 User Manual

OSD Settings
Note: Press the"-" to display
the OSD menu on the left screen
Note: Press the "+" to display the
OSD menu on the right screen
OFF
STAN
DARD
48
50
2
50
BRI
G
HTNESS
CON
TR
AST
ECO
DCR
SHARPNESS
HUE
BRI
G
HTNESS
OFF
STA
NDARD
48
50
2
50
BRIGHTNESS
CON
TRAST
ECO
DCR
SH
ARPNES
S
HUE
BRIGHTNE
S
S
Note: Press the Power Button for 2 seconds
to switch the machine on and off
Button Operation Functions
Power Button
1. Pressing the POWER button for a short while
during the shutdown state
The screen logo
displays after 3 seconds, and
then the signal appears after 5 seconds
2. Pressing the POWER button while in the OSD men
u
“OK” means to confirm the command
3. Press and hold the POWER button for 2 seconds
while in the OSD menu.
“BACK”means return command
"+"
1. Short press when the OSD menu is not displayed The OSD menu will pop-up on the right screen
2.
Short press while in an OSD sub-menu
Navigate the selected setting or increase a value
3. Press and hold while the OSD menu is active Quickly navigate or increase values
4. Short press while the OSD menu is active Navigate “UP”
"-"
1. Short press when the OSD menu is not displayed The OSD menu will pop-up on the left screen
2. Short press while in an OSD sub-menu
Navigate the selected setting or decrease a valu
e
3. Press and hold while the OSD menu is active Quickly navigate or decrease values
4. Short press while the OSD menu is active Navigate “DOWN”
1.Button Operation Guide
10

MAXFREE T2 Specifications

General

Brand	MAXFREE
Model	T2
Category	Monitor
Language	English