Maxi-Cosi Aura - Preparing Seat to Fit Your Child; Configuring the Harness Belt for Shoulder Height

19
use in toddler
mode
Preparingseattotyourchild
CONFIGURING THE HARNESS BELT FOR
SHOULDER HEIGHT:
1. Lifttheharnessreleaseleveratthefrontofseat.
2. Pullbothshoulderstrapssimultaneouslytoloosen
the harness and release the buckle.
3. Liftthemiddlefabricpaneloftheheadrestofthe 
headrest to expose the red headrest adjuster.
4. Squeezetheleverandlifttheheadresttoadjust
 harnessheight.Ensurethattheheadrestclicks
into place.
5. Releasethebuckleandpullharnessstrapsover 
 sidesofinfantseat.Placechildinseat.
6. Placeharnessstrapsoverchild’sshoulders.Fasten
 buckle(pg.16)Pulltheadjusterbeltatthefrontofthe
 seatuntiltheharnessbeltliesrmlyagainstthechild.
You MUST make these adjustments with your child before you install the child
restraint in the vehicle. Please adjust harness according to the infants shoulder height
prior to installation.
2
5
1
WARNINGS
Always adjust the height of the shoulder straps as the child grows.
Failure to fasten and tighten the harness system correctly can result in serious
injury or death.
3
4
6