26
I
Mico Plus
I
Maxi-Cosi
• From under the upholstery, turn and slide buckle’s
metal retainer back through the shell, extending the
buckle’s length.
• The metal retainer should now intersect with the
under surface of the shell (as show in figure c).
• From other side, pull on buckle to check to make sure
buckle’s metal retainer is correctly inserted through
the trim and shell.
Operation and adjustment
Preparing infant seat to fit your child (cont’d)
NOTE: It is recommended the buckle be extended when
the child’s shoulder’s reach harness slots, 3 or 4 as show
in figure d.
d
1
2
3
4
c
To Next Page