Mico Plus
I
Maxi-Cosi
I
49
• Thread harness straps through the harness pads.
• Place infant head insert over harness slots, aligned
with the appropriate slot for your child’s shoulder
height (see page 23).
• Fit end of infant head insert through band on other
side, securing the loop.
• Thread harness straps through slots on infant
head insert, and continue through harness slots on
capsule.
• Thread harness buckle through buckle cover, ensuring
that the largest side is facing the child’s crotch.
• Tuck end of buckle cover in through buckle slot,
securing the cover in place.
Covers and accessories
NOTE: Before fitting covers, remove harness from
splitter plate (see page 24).
NOTE: Refit splitter plate before continuing
(see page 25).
To Next Page