50
I
Mico Plus
I
Maxi-Cosi
• The canopy hoop has an angle that will make the
canopy lean forward when installed. Make sure when
you thread the canopy hoop, the angle is correct.
• Thread plastic strip completely through
channel on the front edge of canopy
• Snap each plastic strip end to each canopy post.
• Fit back of canopy over back of shell.
• Thread canopy hoop through canopy elastic loop.
• Stretch canopy loops over canopy posts.
Canopy use
• To remove canopy: Use a pen
or any pointed object to push
the small tab as illustrated and
simultaneously pull the plastic
strip.
Installation and removal of canopy
To Next Page