34
I
Mico Plus
I
Maxi-Cosi
Installation
Lap sash and lap base installation
• With weakest hand at belt path, tilt and push the
base forward and back, and from side to side.
• If the seat belts do not loosen, your child restraint
should be secure.
• With child secured in child restraint, attach to base.
• Align the slots on the side of child restraint with the
locking bars in the base.
• Push down firmly on the carrying handle and the
front of the child restraint to lock child restraint to
base. You will hear a click when it is locked.
• Pull up on child restraint’s front two corners to make
sure the front of the child restraint is locked to the
base.
NOTE: Some movement from front to back or from side to
side is acceptable.
To Next Page
Loading...
