Pull
Push
45
Forward Facing Mode ISOGO
Tighten ISOGO straps
Step 1. Press the child restraint down
rmly into the vehicle seat and pull
on the ISOGO straps until the ISOGO
strap tension indicators show full
green.
Step 2. Ensure the two strap adjusters
are evenly spaced either side of the
seat and not hanging out of the seat
belt route opening.
Close SMART Lock
®
and restore seat fabric
Step 1. Press the SMART Lock
®
down
rmly to tighten and lock the ISOGO
strap in place (Figure 15).
Step 2. Ensure both tension indicators
show green after locking the SMART
Lock
®
. (Figure 16).
NOTE: Indicators will stay black if
installed incorrectly.
Step 3. Close installation door, button
up seat trim (Figure 17).
Tension Indicator
Figure 15
Figure 16
Figure 17
To Next Page
