No twists
49
Forward Facing Mode
Route seatbelt through
forward facing belt path
Step 1. Fully lengthen the seatbelt and
thread through the yellow forward
facing belt path opening at the side of
seat (Figure 7).
Step 2. Follow the installation path
labels (Figure 8) and feed the seatbelt
over the open SMART Lock
®
(Figure 9)
and through the slots at the opposite
side of the seat (Figure 10).
Step 3. Fasten the buckle. Listen for
a ‘click!’
Step 4. Ensure there are no twists.
Step 5. Ensure harness waist strap is
not caught in car seat harness when
feeding through SMART Lock
®
.
Figure 7
Figure 8
Figure 9
Figure 10
click
TIP Use Magnetic Harness
Holders to keep harness
clear from seatbelt and
SMART Lock
®
.
To Next Page
