Remove Slack from Seatbelt
Pull
Push
Figure 12
50
Remove slack from seatbelt
Step 1. Press the child restraint down rmly into
the vehicle seat.
Step 2. Remove belt slack by pulling on the sash
portion of the belt so the lap portion is taught.
Step 3. Remove all the slack rst from the lap
and sash belts before operating the SMART
Lock
®
.
IMPORTANT:
Always remove slack from seatbelt.
A loose seatbelt is dangerous.
Close SMART Lock
®
and restore seat fabric
Step 1. Press the SMART Lock
®
down
rmly to tighten and lock the vehicle
seat belt installation (Figure 11).
Step 2. Ensure both tension indicators
show green after locking the SMART
Lock
®
(Figure 12).
NOTE: Indicators will stay black if
installed incorrectly.
Step 3. Close installation door and
button up seat trim (Figure 13).
Figure 11
Figure 13
Forward Facing Mode Install using Seatbelt
To Next Page
