13
CHIP SHIELD (g 3)
The chip shield helps to keep dust and
chips away from the operator; it will
not stop objects larger than woodchips
thrown from the bit.
IMPORTANT INFORMATION
WARNING!
• Always wear eye protection. The chip shield deflector is not
intended as a safety guards.
• Always turn the router motor off and unplug router from
the power source before making any adjustments, installing
accessories or performing maintenance. Failure to turn the motor
off and unplug the router could result in accidental starting,
which can cause serious personal injury.
CAUTION!
• Always have the chip shield deflector in place on the base when
operating the router.
g 3
Screw (Included)
To Next Page
Loading...
