Maximum 054-6810-8 User Manual

20
model no. 054-6810-8 | contact us 1-888-670-6682
OPERATING INSTRUCTIONS
TO TURN THE ROUTER ON AND OFF
(g 13)
The router motor is turned “ON” and
“OFF” with using the toggle switch
located on the top cap of the motor
housing. The left side of the toggle
switch hood (when facing the operator)
is marked “I” for “ON”, and the right side
(when facing the operator) is marked “O”
for “OFF”.
To turn the motor “ON”, push the toggle switch to the left side, marked “I” for
“ON”.
To turn the motor “OFF”, push the toggle switch to the right side marked “O” for
“OFF”.
Always hold the router and cutter bit away from the workpiece when turning the
toggle switch “on”.
Only allow the router and cutter bit to come into contact with the workpiece
after the router has reached full speed. Only remove the router and cutter bit
from the workpiece after turning the router motor “off” and allowing the cutter
bit to come to a complete stop. Operating in this manner will increase the life of
the toggle switch and motor, and will increase the quality of the work.
OPERATING INSTRUCTIONS
WARNING!
• Always make sure that the switch is in the “OFF” position before
plugging it into a power source.
FPO
g 13

Maximum 054-6810-8 Specifications

General

Brand	Maximum
Model	054-6810-8
Category	Power Tool
Language	English