12
model no. 054-6810-8 | contact us 1-888-670-6682
IMPORTANT INFORMATION
Before attempting to use this router, familiarize yourself with all of its operating
features and safety requirements. This electric router is designed to be used only
for milling and edge forming in wood or similar materials. Any other use of the
router that is not indicated in this manual could damage the router or seriously
injure the operator and, therefore, is expressly excluded from the application
range.
SOFT-START FEATURE
The soft-start feature minimizes torque twist, which is customary in larger router
motors, by limiting the speed at which the motor starts. This increases the life of
the motor.
LED WORKLIGHTS (g 1)
The router motor has 3 built-in
worklights located around the collet;
these provide high visibility of the
workpiece when cutting. These lights are
always “ON” when the toggle switch is in
the “on” position.
“LIVE TOOL INDICATOR”
LIGHT (g 2)
The router also has a green “LIVE TOOL
INDICATOR” light located on the motor
housing top cap where the power cord
enters the motor housing. This green
light is always on when router motor is
plugged into a power source.
HEAVY-DUTY EDGE GUIDE
This Fixed-base Router comes with
a Heavy-duty Edge Guide. This edge
guide can be used as an aid in routing
applications such as decorative edging, straight-edge planing and trimming,
grooving, dadoing, and slotting.
IMPORTANT INFORMATION
g 1
g 2
To Next Page
Loading...
Need help?
General
