WARNING!
• If any parts are damaged or missing, do not operate this
tool until the parts are replaced. Use of this product with
damaged or missing parts could result in serious personal
injury.
• Do not attempt to modify this tool or create accessories not
recommended for use with this tool. Any such alteration or
modification is misuse and could result in a hazardous
condition leading to possible serious personal injury.
• Do not connect to power supply until assembly is complete.
Failure to comply could result in accidental starting and
possible serious personal injury.
• Risk of injury! Always pull out the mains plug (disconnect
the product from its power supply) before commencing
work on the product.
21
model no. 055-6766-2 | contact us 1-888-670-6682
ASSEMBLY
model no. 055-6766-2 | contact us 1-888-670-6682
20
ASSEMBLY
UNPACKING
Do not use this product if any parts of the package contents are already assembled to
your product when you unpack it. Package contents are not assembled to the product by
the manufacturer and require customer installation. Use of a product that may have been
improperly assembled could result in serious personal injury.
• Carefully remove the table saw from the carton and remove the protective polyfoam
from around the motor.
• Inspect the tool carefully to make sure no breakage or damage occurred during
shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily
operated the tool.
• The saw is factory set for accurate cutting. After assembling it, check for accuracy. If
shipping has influenced the settings, refer to specific procedures explained in this
manual.
• If any parts are damaged or missing, please call 1-888-670-6682 for assistance.
TOOLS NEEDED FOR ASSEMBLY
Screwdriver Framing square
Star-head screwdriver
Wrench
Triangle square
No. Description Qty Illustration
Blade wrenches
6 mm Hex key
9
10
2
1
To Next Page
Loading...
Need help?
General
