16
model no. 055-6767-0 | contact us 1-888-670-6682
- General Purpose Wood Cutting: 24–40 TPI
- Fine Woodworking Cutting: 60–80 TPI
- Non-Ferrous Metal Cutting: Use only special blades designed for cutting this type
of material.
- Plastic Cutting: Use only special blades designed for cutting plastic.
• When cutting non-ferrous or plastic, be sure to clean up completely after each use.
Take special care with metal shavings after each cut, as these can cause damage to
the table top. ALWAYS WEAR EYE PROTECTION.
ACCESSORIES AND ATTACHMENTS
To Next Page
Loading...
