Maximum 057-2330-8 - 页 12

OPERATION
12
Model No.057-2330-8 | Contact us: 1-888-670-6682
11
12
WARNING
·Always hold the workpiece firmly, especially the
longer and heavier section.
Sawing
Workpieces of the
Same Length
The material stop
can be used for
easily sawing
workpieces to the
same length.
Tilt the material
stop upward.
Position the
workpiece support
(F) at the desired
clearance to the
saw table of the
power tool.
(see Figs. 11 and 12)