Maximum 057-2330-8 User Manual

Model No.057-2330-8 | Contact us: 1-888-670-6682
6
4
5
Setting up the Saw Stand (see Figs. 4 and 5)
Lay the saw stand upside down on the
floor (legs facing upward).
Push the locking pin in and tilt the leg
upward until the lock pin can be heard to
engage Repeat with the other three legs. .
Flip the saw stand back to the working
position.
firmlyagainst the floor (step
Tighten the lock nut again (step
The saw stand is easily levelled with
its height-adjustable legs.
Loosen lock nut (step
the leg in or out until the saw stand
is aligned level and all four legs are
) and screw
).
).
1
2
3
3
Installing the Handle (see Fig. 3)
Insert the handle (E) onto the two tubular
brackets on the end of the table (A) and
secure in place with bolt (N) and nut (L1).
31 2
ASSEMBLY

Maximum 057-2330-8 Specifications

General

Brand	Maximum
Model	057-2330-8
Category	Racks & Stands
Language	English