WARNING
Ensure that the saw stand is stable and that all locking
pins have been engaged.
Assembling the Saw Stand
Carefully remove all parts included in the
delivery from their packaging.
ASSEMBLY
5
TM
Put the wheel axle C through the hole of the ( )
4
3
5
2
2
4
5
3
bracket (B) (step ) Secure in place using flat.
washer (M3) (step ), wheel (D) (step ),
1
2
3
1
Installing the Wheels (see Figs. 1 and 2)
Fasten the bracket (B) to the table (A) with
bolt (K) and nut (L1) .
2
washer (M2) (step ), and nut (L2) (step )
4
5
Repeat with the other wheel.
1
.
To Next Page
Loading...