9. INSTALLATION
This menu contains following items:
• Automatic search cable
• Manual search cable
• Default setting
9.1 Automatic Search
To perform a channel search, the antenna setting needs configuring according
to your antenna system.
9.2 Manual Search
After having chosen the right search setting then press RED to start the
search.
Please note: It is only possible to start the search when having a valid signal
9. 3 Default Setting
In this menu it is possible to delete
channel lists.
It is also possible to do a Factory Reset.
Default setting: Resets everything.
Channels: Resets all channels.
Configuration: Resets all settings.
To Next Page
Loading...
