6. WATCHING TV
This chapter describes how to watch TV and listen to Radio using the receiver.
Thanks to the advantages of Digital TV transmissions, extra features are
added to the broadcast, such as information about the current and next
program and extra options such as the ability to choose between different
languages for Audio and Subtitling.
General watching
• Use the CHANNEL UP or CHANNEL DOWN keys to go to the next
and previous channel respectively.
• Use the NUMBER keys to input a channel number.
• Press the OK / ENTER key in Live TV Mode to display the channel
list.
• Use RECALL key on the remote control to select the channel that the
user was watching before the currently selected channel.
• Use TV/RADIO key on the remote control to toggle between the last
selected TV or Radio Channel.
• Press UP or DOWN keys on the front panel of the receiver to select
the next/previous channel from the current channel list.
• Use INFO key to display the information banner about the current
program. Press INFO key again to display the information of the
current Event. With the CURSOR RIGHT or CURSOR LEFT you can
see the next event information. Press again INFO key or the EXIT
key to hide the banner and event information.
Please note: Programme information will only be displayed if it is included in
the current transmission. Availability and validity of program information is
dependent on the broadcaster.
6.2 Options
• Subtitling language (green key): The user can select from available
subtitle languages, if more than one exists. Selection from the available
choices is made with CURSOR UP or CURSOR DOWN key and
confirmation by OK key.
• Audio track (red key): Some TV channels broadcast multiple audio tracks,
for example different languages or AC3 Audio tracks. Selection from the
available choices can be made by pressing the CURSOR UP or CURSOR
DOWN keys and confirming with the OK key.
Beside alternative tracks, you can set the mode to Stereo or Mono-left or -
right.
To Next Page
Loading...
Need help?
General
