14. SYSTEM
In this menu it is possible to find various
information about the receiver, including
software version.
14.1 Software Upgrade
This receiver supports software updating
via USB. Follow these instructions:
Copy the software file into the root
directory of the USB device.
The receiver will now mark the software
on the screen.
Press OK to begin the software upgrade.
The receiver will automatically restart after
the upgrade.
Please note: It may take several minutes to upgrade the receiver.
Warning! Please never turn off the receiver while upgrading!
14.2 Default Setting
In this menu it is possible to delete
channel lists.
It is also possible to do a Factory Reset.
Default setting: Resets everything.
Channels: Resets all channels.
Configuration: Resets all settings.
To Next Page
Loading...
Need help?
General
