10.3 Parental Control
To use the Parental Control function you
will be asked to enter your access PIN
code.
The PIN code is set to 0000 at the
factory!
• Change PIN code: Use this function to change your PIN code to some other
four digit number.
• New PIN: Enter a new four digit PIN code by pressing the OK key and using
the number keys on your remote control.
• Verify new PIN code: Re-enter the same new four digit PIN code once
again to verify the new PIN code.
• Menu Lock: After turning the Menu Lock to “ON”, the complete Menu will
require your PIN code to be entered before opening
To Next Page
Loading...
