Under Jump Gap you can set the jumps to be made during playback when
you press the < / > keys – choose between 1, 5, 10 or 20% of the recording.
Choose your Timeshift Option: Automatic or Manual
11.3 HDD Properties
In this Sub Menu you can see all information about your connected Hard-Disk
Drive as well as an option to format the HDD
HDD Information: Displays the file
system, the total and the used capacity.
HDD Speed: Check the speed of the
connected USB HDD and see if it meets
your requirements.
Formatting: After confirming with the OK
key the HDD is formatted.
Please note: All files on the Hard-Disk-
Drive will be deleted when formatting.
To Next Page
Loading...
