page 9
Station order (continued)
• Favourite stations
Your ten most listened-to stations will be moved to the top of the station list. Next
time you use the menu, you will see an additional item:
• Favourites ( ) to presets
Your favourite stations will be allocated to the preset buttons, overwriting any you
have set previously.
Manual tune
Use the INFO, TUNE and SELECT buttons, as described at the top of page 8 to choose the
Manual tune menu.
Press the TUNE+ or TUNE– buttons to see the different
channels that are available.
When you see the channel you want to use, press
the SELECT button. The Signal strength meter will be
displayed:
The bar in the middle of the meter shows you the
minimum signal strength needed for good DAB reception.
The grey bars will go up and down, showing you the
changing signal strength as you adjust the aerial and
radio position.
To turn off the Signal strength meter, press the SELECT
button.
Note – You can turn on the Signal strength meter any time, simply by pressing the
SELECT button whilst any DAB radio station is playing.
Signal strength low
Signal strength OK
Dynamic range control (DRC)
Your radio can use DRC to maintain the audio volume at a constant level. A high DRC
value would be useful in a noisy environment such as the car, but a low value would
be better for listening to classical music at home.
Use the INFO, TUNE and SELECT buttons, as described at the top of page 8 to choose the
DRC menu.
Press the TUNE+ or TUNE– buttons to see the different
DRC values that are available.
When you see the value you want to use, press the
SELECT button.
To Next Page
Loading...
Need help?
Power
Frequency