Maxol MONTE CARLO 3000 - Thermostat and Ignition System; Appliance Data

MONTE CARLO 3000ti and 3000ti DE LUXE
4)
REPLACING THE THERMOSTAT
a) Remove the thermostat from its mounting bracket - see instruction 2.
b) Disengage the thermostat phial from its clips and withdraw from the oven - take care not to damage
the oven insulation.
c) When fitting the new thermostat ensure that the phial is firmly hold by the clips.
5) IGNITION SYSTEM
If the ignition system is not working satisfactorily :-
a) Ensure that the burner and electrode are clean and the electrode lead connections are secure.
b) Check that the electrode gap is 4mm + 0.5.
c) Operate the ignition and check for a spark at the burner.
d) If there is no spark at the burner check the ignition generator.
e) If the ignition generator is satisfactory check the ignition leads, interrupter switch and electrode replacing
parts as required.
NB THE IGNITION SYSTEM WILL NOT WORK WITH THE DOORS CLOSED.
APPLIANCE DATA
Dimensions
Overall
Weight
Setting Pressure
Injector Size
Electricity Supply
(Where applicable)
Heat Input
Height
440
10kg
Width
475
Depth
430
Butane 28 mbar
Propane 37 mbar
Monte Carlo 3000 and 3000i
AMAL40
Monte Carlo 3000U and 3000ti DeLuxe
AMAL45
12vdc
Monte Carlo 3000 and 3000i 1.2kW
Monte Carlo 3000ti and 3000ti DeLuxe 1.665kW
BURCO DEAN APPLIANCES Ltd
ROSF. GROVE. BURNLEY
Telephone: (0282) 27241
Telex: 63275 BDAL
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans