18
4. Unfold the fl ipover (FIG. 18-1).
Never operate control switch while unfolding the fl ipover.
WARNING
!
FLIPOVER UNFOLDED ABOVE GROUND
FIG. 18-1
5. Lower platform (FIG. 18-2) to
ground level to load or unload
on the ground. Raise platform
(FIG. 18-3) to vehicle bed level
to load or unload vehicle. Refer
to section about LOADING OR
UNLOADING PLATFORM in
this manual.
PLATFORM LOWERED TO GROUND
FIG. 18-2
PLATFORM RAISED TO BED LEVEL
FIG. 18-3
OPERATION - Continued
To Next Page
Loading...
