20
8. Stow the Liftgate as follows.
Hold the external up-down
toggle switch in the UP posi-
tion (FIG. 20-1) until the lowest
point of platform and arms are 6”
above the ground (FIG. 20-2).
NOTE: If necessary, release the toggle switch to stop the platform
from moving.
Damage will occur if Liftgate is not in correct position when
operating the slide function. Ensure platform & arms have 6”
of ground clearance, at lowest point, before Liftgate is run in
under vehicle.
CAUTION
OPERATION - Continued
UP SWITCH
FIG. 20-1
UP-DOWN
TOGGLE SWITCH
LOWEST POINT 6” ABOVE GROUND
FIG. 20-2
6”
GROUND
To Next Page
Loading...
