31
UNLOADING PLATFORM AT
GROUND LEVEL (RAMP POSITION)
FIG. 31-2
ROTATING TO RAMP POSITION
(RH SIDE SHOWN)
FIG. 31-1
10. Unload the platform at ground
level as follows. Reposition
retention ramps to the ramp
position (FIG. 31-1). Then,
move cart off the platform as
shown in FIG. 31-2.
RETENTION
RAMPS
LOADING OR UNLOADING PLATFORM - Cont’d.
LOCKING
ARM
RAMP
POSITION
To Next Page
Loading...
