32
11. To stow ramps, rotate each
retention ramp to the fl at posi-
tion as shown in FIG. 32-1.
Push the retention ramps fully
into the catches (FIG. 32-2).
Then, make sure retention
ramps are hooked to the
fl ipover (FIG. 32-2).
ROTATING RAMP TO STOWED
POSITION (RH SIDE SHOWN)
FIG. 32-1
STOWED
FOLDING RETENTION RAMP
(RH SIDE SHOWN)
FIG. 32-2
1 PUSH
LOCKING
ARM
RAMP
CATCH
11. Fold fl ipover (FIG. 32-3) on top of
platform until latched.
FOLDING FLIPOVER
FIG. 32-3
FLIPOVER
PLATFORM
LATCH
FLIPOVER
To Next Page
Loading...
