11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
21
Bolt on the pump cover as shown in
FIG. 21-1. Apply anti-seize to threads
of fasteners.
BOLTING PUMP COVER
FIG. 21-1
CAUTION
Pump cover must be correctly secured to prevent it from becoming a hazard.
To secure pump cover, the long side of the holder fl ats must butt against pump
cover as shown in the illustration.
FLAT WASHER, 3/8” X 1/16”
(2 PLACES)
COVER BRACKET
(2 PLACES)
PUMP COVER
CAP SCREW, 3/8”-16
(2 PLACES)
NUT, 3/8”-16
(2 PLACES)
To Next Page
Loading...
