EasyManua.ls Logo

Maxon GPTLR-44 - Step 10: Remove Locking Brackets & Check Interference; Checking Platform to Extension Plate Gap

Maxon GPTLR-44
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
47
LIFTGATE WILL NOT LIFT RATED CAPACITY
1. Lower platform to the ground. See OPERATION
MANUAL.
2. Use voltmeter to verify the battery voltage is a
minimum 10.5 volts DC, or 21 volts DC for a 24
volt system, under load from pump motor.
POWER UNIT FLUID LEVEL
FIG. 47-1
3. Check the hydraulic fl uid level in reservoir as
follows. With platform on the ground, fl uid level
should be as shown in FIGS. 47-1.
RESERVOIR

Other manuals for Maxon GPTLR-44

Related product manuals