Maxon MX-3204 - Phone Functionality and Reset

3
3.10
Any Key Answer
■ you can set the phone to answer incoming calls via
t h e
,
key or the volume keys and,
0
-
9
, and
Õ Õ Õ Õ Õ Õ Õ Õ Õ Õ Õ\\\\;./
;
k e y s
/
■
625
■
-
/
]
■
[
Reset
■ the phone can be reset to the original manufacture
settings (see the list below)
/
■
642
■
-
/
]
■
[
•
Ring type:Type C
•
Greeting: Maxon MX-3204
•
Ring volume: 5 bells
•
Cell Broadcast: Off
•
Key sound: Tones
•
Reset of call list
•
Info tones: On
•
Keypad lock:O f f
•
Backlight: Off
•
I n d i c a t o r : O n
•
Discharge: Manual
•
Vibrate mode:O f f
•
Send DTMF: On
•
Message alert: O n
•
Redialling: Off
•
Network mode: Automatic
•
Broadcast alert: O f f
•
Display language: Automatic
•
Answer key: <Send>
3
3.9
DTMF Tones
■ your phone automatically generates DTMF tones so
that you can control advanced facilities such as
paging, messaging and home banking services. The
tones can be annoying to your caller when entering
numbers on display during a call (refer to ‘Scratch
Pad’) and could cause accidental operation of a
connected facility. To prevent this you can switch the
tones OFF and ON when necessary
/
■
624
■
-
/
]
■
[
Earpiece Volume
■ to adjust the earpiece volume at standby or during
a call press the volume keys on the side of the phone
(d e c r e a s e )
■
(i n c r e a s e )
■ the volume keys can be used to adjust the earpiece
volume when you are working with the feature menu
Scratch Pad
■ whilst engaged in a call, you can make a note of a
telephone number using the keypad. You may want to
inform your caller that audible tones will be generated
when you press the keys (you have the option to turn
the tones OFF, refer to DTMF tones above)
■ the noted number is stored in the phone as the last
dialled number (refer to Call List on page 2.2), so you
can recall and dial it later. If other numbers are dialled
before recall, you will have to search for the noted
number in the list
,
(l a t e s t )
■
-/]
( s e a r c h )
■
,
( d i a l )