11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
21
BOLTING ON INSTALLATION BRACKETS
FIG. 21-2
2. Bolt 2 installation brackets (parts box items) on the
extension plate as shown in FIG. 21-2. Tighten hex
nuts securely.
BRACKET
(2 PLACES)
EXTENSION
PLATE
CAP SCREW
1/2”-13 X 1-1/2” LG.
(2 PLACES)
FLAT WASHER
1/2”-13
(2 PLACES)
HEX NUT
1/2”-13
(2 PLACES)
NOTE: During installation of Liftgate, installation brackets keep the heel of the plat-
form level with extension plate and maintain a ¾” gap between extension
plate and heel of platform. The extension plate has bolt holes for bolting on
the installation brackets provided in parts box.
STEP 1 - ATTACH EXTENSION PLATE TO VEHICLE -
Continued
EXTENSION PLATE WELDS - VIEWED FROM UNDERNEATH
FIG. 21-1
VEHICLE
BODY
3/16”
WELD LENGTH & SPACE:
2” - 11 3/4” (96” WIDE VEHICLE)
2” - 12 1/2” (102” WIDE VEHICLE)
EXTENSION
PLATE
To Next Page
Loading...
